Profile before calibration
Final calibration profile
Error message received twice during the calibration process. Finally work the thrid time.
 |
| Before |
 |
| After |
 |
| Before |
 |
| After |
 |
| Before |
 |
| After |
Eye One Monitor Calibration performed 29 March 2012 – Monitor DigiDarkrm 13
Before Calibration
After Calibration
Summary
Profile Saved
Week 6, 21 March 2012
Calibration Assignment unable to be performed. Computers in Lab no longer have the eye-one software installed. Dave is working to rectify the problem with IT.
Eye One Monitor Calibration performed 2 March 2012 – Monitor DigiDarkrm 3
Before Calibration
After Calibration
Profile screen shot
Screen shots above do not reflect the amount of difference, before and after, as seen on the monitor itself.
Thanks Paul. I noted your post on being unable to do your second screen calibration. You can use one of the screens attached to the film scanners, these still run the old OS, so calibration can be performed. Post your results on your blog. Hopefully, we'll have all screens and Macs up to scratch by the time a third calibration is due. Cheers, Brian.
ReplyDeleteHi Brian. Thanks for your message. Above my note about the Eye-One not being available there is a blog entry about a week later on the 29th of Mar where I did use one of the monitors attached to the film scanners so I was up to date with my 2nd calibration and blogged already when you sent your note.
ReplyDeleteI don't envy you having to go through all those blog over Easter. Hope you have lots of chocolate and Red Bulls to keep you alert.